PartsTable
Technical Data Sheet
Download PDF

7100164489 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7100164489: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: RUBBER SILICONE, design_type: FRICTION, material_document_and_classification: ASTM D412 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D624 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-439-4760, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7100164489
NSN: 5340-01-439-4760
FSC: 5340 — Hardware, Commercial
CAGE: 76381 — 3M COMPANY (USA)
SPECIFICATIONS
materialRUBBER SILICONE
design_typeFRICTION
end_item_identificationW/S:SPRUANCE CLASS DD (963); KIDD CLASS DDG; TICONDEROGA CLASS CG (47); ARLEIGH BURKE CLASS DDG; TARAWA CLASS LHA; WASP CLASS LHD
material_document_and_classificationASTM D412 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D624 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-439-4760
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7100164489 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D412 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D624 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER SILICONE
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D412 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM D624 ASSN STD SINGLE MATERIAL RESPONSE
END ITEM IDENTIFICATIONW/S:SPRUANCE CLASS DD (963); KIDD CLASS DDG; TICONDEROGA CLASS CG (47); ARLEIGH BURKE CLASS DDG; TARAWA CLASS LHA; WASP CLASS LHD
MATERIALRUBBER SILICONE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
80-6108-4319-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
78-8092-2754-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
EMPC-01Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7100164489?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7100164489?
7100164489 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 7100164489?
There are 3 known substitutes for 7100164489: 80-6108-4319-7, 78-8092-2754-5, EMPC-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 7100164489?
7100164489 is cataloged in the U.S. Government catalog under NSN 5340-01-439-4760. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7100164489