PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 71-TM-04201-S
71-TM-04201-S ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: RUBBER WHEEL RIM, wheel_type: SOLID, plate_style: RECTANGULAR-COUNTERSUNK ENDS, tread_width: 1.625 INCHES NOMINAL IN, wheel_diameter: 4.000 INCHES NOMINAL IN, effective_height: 5.562 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-3944, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71-TM-04201-S
NSN: 5340-00-200-3944
FSC: 5340
CAGE: 96266 — ALBION INDUSTRIES, INC. (USA)
SPECIFICATIONS
materialRUBBER WHEEL RIM
wheel_typeSOLID
plate_styleRECTANGULAR-COUNTERSUNK ENDS
tread_width1.625 INCHES NOMINAL IN
wheel_diameter4.000 INCHES NOMINAL IN
wheel_quantity1
effective_height5.562 INCHES NOMINAL IN
style_designatorSWIVEL OFFSET
features_providedAXLE LUBRICATION FITTING AND SWIVEL LUBRICATION FITTING
surface_treatmentZINC BODY
caster_plate_width3.875 INCHES NOMINAL IN
wheel_bearing_typeROLLER
NSN5340-00-200-3944
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 71-TM-04201-S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SAFE OPERATING LOAD RATING: 450.0 POUNDS NOMINAL LBS
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.625 INCHES NOMINAL IN
•
CASTER PLATE LENGTH: 5.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SWIVEL OFFSET
•
CASTER PLATE WIDTH: 3.875 INCHES NOMINAL IN
•
MATERIAL: STEEL PLATE
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SAFE OPERATING LOAD RATING450.0 POUNDS NOMINAL LBS
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.625 INCHES NOMINAL IN
CASTER PLATE LENGTH5.375 INCHES NOMINAL IN
STYLE DESIGNATORSWIVEL OFFSET
CASTER PLATE WIDTH3.875 INCHES NOMINAL IN
MATERIALSTEEL PLATE
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.625 INCHES NOMINAL IN
MATERIALRUBBER WHEEL RIM
WHEEL BEARING TYPEROLLER
SURFACE TREATMENTZINC BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
201299Upgraded Successor
successor cross-reference
successor
131-0965-00Interchangeable
interchangeable cross-reference
interchangeable
47792Interchangeable
interchangeable cross-reference
interchangeable
A-3103Interchangeable
interchangeable cross-reference
interchangeable
3390/289/2Interchangeable
interchangeable cross-reference
interchangeable
435332-21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 71-TM-04201-S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71-TM-04201-S?
71-TM-04201-S is a CASTER,SWIVEL.
What parts can replace 71-TM-04201-S?
There are 10 known substitutes for 71-TM-04201-S: 201299, 131-0965-00, 47792 and 7 more. Substitute compatibility should be verified for your specific system.
Is 71-TM-04201-S still available?
71-TM-04201-S is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71-TM-04201-S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026