PartsTable
Technical Data Sheet
Download PDF

71-2733769-1 — STANDOFF,THREADED,SNAP-IN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

71-2733769-1: STANDOFF,THREADED,SNAP-IN.

The STANDOFF,THREADED,SNAP-IN is a the manufacturer industrial component. Key specifications include length: 0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, material: COPPER ALLOY 360 OVERALL, thread_class: 2B LEFT INTERNAL (INCLUDES THRU THREAD), hole_diameter: 0.150 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN, thread_length: 0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN, special_features: THREADED END OUTSIDE DIAMETER IS 0.250. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-496-9753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71-2733769-1
NSN: 5340-01-496-9753
FSC: 5340 — Hardware, Commercial
CAGE: 67032 — GENERAL DYNAMICS MISSION SYSTEMS, INC. (USA)
SPECIFICATIONS
length0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
materialCOPPER ALLOY 360 OVERALL
thread_class2B LEFT INTERNAL (INCLUDES THRU THREAD)
hole_diameter0.150 INCHES MINIMUM AND 0.153 INCHES MAXIMUM IN
thread_length0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
special_featuresTHREADED END OUTSIDE DIAMETER IS 0.250
style_designatorINTERNALLY THREADED FULL LENGTH
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
surface_treatmentTIN OVERALL
nominal_thread_size0.112 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
end_item_identification5895014767819
right_projection_length0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
NSN5340-01-496-9753
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 71-2733769-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-T-10727, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626, COMP 22 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
•
NOMINAL THREAD SIZE: 0.112 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
TECHNICAL CHARACTERISTICS
LENGTH0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-T-10727, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.250 INCHES MINIMUM AND 0.266 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
STYLE DESIGNATORINTERNALLY THREADED FULL LENGTH
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626, COMP 22 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
NOMINAL THREAD SIZE0.112 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
SPECIAL FEATURESTHREADED END OUTSIDE DIAMETER IS 0.250
SURFACE TREATMENTTIN OVERALL
THREAD CLASS2B LEFT INTERNAL (INCLUDES THRU THREAD)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 71-2733769-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71-2733769-1?
71-2733769-1 is a STANDOFF,THREADED,SNAP-IN.
What is the NSN for 71-2733769-1?
71-2733769-1 is cataloged in the U.S. Government catalog under NSN 5340-01-496-9753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71-2733769-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.