PartsTable
Technical Data Sheet
Download PDF

7095-10-856-1041 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7095-10-856-1041: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OUTER RING, bore_diameter: 25.2480 INCHES MINIMUM AND 25.2500 INCHES MAXIMUM IN, overall_width: 1.9800 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, special_features: CADMIUM PLATE ALL EXPOSED SURFACES EXCEPT BORE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-094-6792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7095-10-856-1041
NSN: 3110-01-094-6792
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 32828 — KAYDON CORPORATION DBA KAYDON CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OUTER RING
bore_diameter25.2480 INCHES MINIMUM AND 25.2500 INCHES MAXIMUM IN
overall_width1.9800 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresCADMIUM PLATE ALL EXPOSED SURFACES EXCEPT BORE
style_designatorSHOULDERED INNER RING, NON-SEPARABLE, FACE TO FACE MOUNTING
bearing_seal_typeCONTACT
internal_clearance0.0034 INCHES MINIMUM RADIAL IN
overall_outside_diameter27.2480 INCHES MINIMUM AND 27.2500 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
NSN3110-01-094-6792
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7095-10-856-1041 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
BEARING SEAL TYPE: CONTACT
•
INTERNAL CLEARANCE: 0.0034 INCHES MINIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SHOULDERED INNER RING, NON-SEPARABLE, FACE TO FACE MOUNTING
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OVERALL OUTSIDE DIAMETER: 27.2480 INCHES MINIMUM AND 27.2500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
BEARING SEAL TYPECONTACT
INTERNAL CLEARANCE0.0034 INCHES MINIMUM RADIAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORSHOULDERED INNER RING, NON-SEPARABLE, FACE TO FACE MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH1.9800 INCHES MINIMUM AND 2.0000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER27.2480 INCHES MINIMUM AND 27.2500 INCHES MAXIMUM IN
LOAD DIRECTIONRADIAL
SPECIAL FEATURESCADMIUM PLATE ALL EXPOSED SURFACES EXCEPT BORE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
SB1566-102Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 7095-10-856-1041?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7095-10-856-1041?
7095-10-856-1041 is a BEARING,BALL,DUPLEX.
What parts can replace 7095-10-856-1041?
There is 1 known substitute for 7095-10-856-1041: SB1566-102. Substitute compatibility should be verified for your specific system.
What is the NSN for 7095-10-856-1041?
7095-10-856-1041 is cataloged in the U.S. Government catalog under NSN 3110-01-094-6792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7095-10-856-1041