PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70927283
70927283 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 500.000 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, special_features: WITH PROTECTIVE INNER CASE, surface_treatment: PHOSPHATE CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-479-4196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70927283
NSN: 5330-00-479-4196
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width500.000 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
special_featuresWITH PROTECTIVE INNER CASE
surface_treatmentPHOSPHATE CASE
housing_bore_diameter3.543 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter1.938 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-479-4196
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70927283 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 1.938 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.543 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
SURFACE TREATMENT: PHOSPHATE CASE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER1.938 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.543 INCHES NOMINAL IN
SPECIAL FEATURESWITH PROTECTIVE INNER CASE
CASE STYLESQUARE
SURFACE TREATMENTPHOSPHATE CASE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
SEALING ELEMENT STYLEANGULAR-OPPOSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
226017Interchangeable
interchangeable cross-reference
interchangeable
801E5531Interchangeable
interchangeable cross-reference
interchangeable
415130Interchangeable
interchangeable cross-reference
interchangeable
386-7249P12Interchangeable
interchangeable cross-reference
interchangeable
JANTX2N2369AAInterchangeable
interchangeable cross-reference
interchangeable
2520PL1595584Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70927283?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70927283?
70927283 is a SEAL,PLAIN ENCASED.
What parts can replace 70927283?
There are 9 known substitutes for 70927283: 226017, 801E5531, 415130 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70927283?
70927283 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-479-4196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70927283

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026