PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70925604
70925604 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL BAND, slot_width: 0.406 INCHES NOMINAL IN, slot_length: 0.500 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL IN, style_designator: SINGLE LOOP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-139-6783, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70925604
NSN: 5340-00-139-6783
FSC: 5340
CAGE: K5770 — H M PLANT LIMITED (GBR)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialSTEEL BAND
slot_width0.406 INCHES NOMINAL IN
slot_length0.500 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.063 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.625 INCHES NOMINAL IN
NSN5340-00-139-6783
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70925604 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: STEEL BAND
•
LOOP INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
SLOT LENGTH: 0.500 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.063 INCHES NOMINAL IN
•
SLOT WIDTH: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.406 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL BAND
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
SLOT LENGTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.063 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
SLOT WIDTH0.406 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
60-627Interchangeable
interchangeable cross-reference
interchangeable
60-401PC107Interchangeable
interchangeable cross-reference
interchangeable
60-577Interchangeable
interchangeable cross-reference
interchangeable
033617Interchangeable
interchangeable cross-reference
interchangeable
1002187Interchangeable
interchangeable cross-reference
interchangeable
925604Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70925604?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70925604?
70925604 is a CLAMP,LOOP.
What parts can replace 70925604?
There are 10 known substitutes for 70925604: 60-627, 60-401PC107, 60-577 and 7 more. Substitute compatibility should be verified for your specific system.
Is 70925604 still available?
70925604 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70925604

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026