PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 709011
709011 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RELAY,ELECTROMAGNETIC is a the manufacturer industrial component. Key specifications include duty_type: CONTINUOUS, bore_shape: STRAIGHT, bore_diameter: 3.7492 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM IN, overall_width: 2.447 INCHES NOMINAL IN, overall_height: 2.519 INCHES NOMINAL IN, overall_length: 3.506 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8514, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
709011
NSN: 3110-00-151-8514
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL COMP E4340H OR STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 8720 OR STEEL COMP 1018 OR STEEL COMP 1117 OR STEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP 1022 OVERALL
duty_typeCONTINUOUS
bore_shapeSTRAIGHT
bore_diameter3.7492 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM IN
coil_quantity1
overall_width2.447 INCHES NOMINAL IN
overall_height2.519 INCHES NOMINAL IN
overall_length3.506 INCHES NOMINAL IN
surface_finishGROUND
special_features1 TO 4 OIL HOLES,OIL GROOVE OPTIONIAL
style_designatorSOLID INNER RACE, JOURNAL AND NEEDLE
winding_quantity1
NSN3110-00-151-8514
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 709011 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 3.7492 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 4.2476 INCHES MINIMUM AND 4.2485 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID INNER RACE, JOURNAL AND NEEDLE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
OVERALL WIDTH2.0050 INCHES MINIMUM AND 2.0100 INCHES MAXIMUM IN
SPECIAL FEATURES1 TO 4 OIL HOLES,OIL GROOVE OPTIONIAL
SURFACE FINISHGROUND
BORE DIAMETER3.7492 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER4.2476 INCHES MINIMUM AND 4.2485 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID INNER RACE, JOURNAL AND NEEDLE
MATERIALSTEEL COMP E4340H OR STEEL COMP 4720 OR STEEL COMP 8620 OR STEEL COMP 8720 OR STEEL COMP 1018 OR STEEL COMP 1117 OR STEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP 1022 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
PL-E185E001 PIECE 71Interchangeable
interchangeable cross-reference
interchangeable
IR263220Interchangeable
interchangeable cross-reference
interchangeable
MI26Interchangeable
interchangeable cross-reference
interchangeable
MI38Interchangeable
interchangeable cross-reference
interchangeable
M1-38Interchangeable
interchangeable cross-reference
interchangeable
27765Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 709011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 709011?
709011 is a RELAY,ELECTROMAGNETIC.
What parts can replace 709011?
There are 16 known substitutes for 709011: PL-E185E001 PIECE 71, IR263220, MI26 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 709011?
709011 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 709011

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026