PartsTable
Technical Data Sheet
Download PDF

7090-265 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7090-265: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, outside_diameter: 3.137 INCHES NOMINAL IN, center_hole_diameter: 2.844 INCHES MINIMUM AND 2.874 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-263-9447, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7090-265
NSN: 5331-00-263-9447
FSC: 5331 — O-ring
CAGE: 28569 — HICKOK WAEKON LLC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
outside_diameter3.137 INCHES NOMINAL IN
center_hole_diameter2.844 INCHES MINIMUM AND 2.874 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-263-9447
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7090-265 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 3.137 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.844 INCHES MINIMUM AND 2.874 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER3.137 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.844 INCHES MINIMUM AND 2.874 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR
SUBSTITUTES & CROSS-REFERENCES 5
AS8040F3-233Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-233C557-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS568B-233Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2-233Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ARP568-233C557- 7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7090-265?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7090-265?
7090-265 is a O-RING.
What parts can replace 7090-265?
There are 5 known substitutes for 7090-265: AS8040F3-233, 2-233C557-70, AS568B-233 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7090-265?
7090-265 is cataloged in the U.S. Government catalog under NSN 5331-00-263-9447. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7090-265