PartsTable
Technical Data Sheet
Download PDF

709-5486672 PC 102 — WASHER,BEVEL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

709-5486672 PC 102: WASHER,BEVEL.

The WASHER,BEVEL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5456 OVERALL, hole_diameter: 0.531 INCHES NOMINAL IN, overall_width: 2.125 INCHES NOMINAL IN, major_thickness: 0.438 INCHES NOMINAL IN, special_features: H117 IS ALSO INCLUDED FOR ALUMINUM 5456 HEAT TREATMENT, style_designator: BEVEL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-306-4866, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
709-5486672 PC 102
NSN: 5310-01-306-4866
FSC: 5310 — Nuts and Washers
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5456 OVERALL
hole_diameter0.531 INCHES NOMINAL IN
overall_width2.125 INCHES NOMINAL IN
major_thickness0.438 INCHES NOMINAL IN
special_featuresH117 IS ALSO INCLUDED FOR ALUMINUM 5456 HEAT TREATMENT
style_designatorBEVEL
material_document_and_classificationQQ-A-250/7,H32 FED SPEC 1ST MATERIAL RESPONSE OR ASTM B209,H116,CAGEC 53711 ASSN STD 2ND MATERIAL RESPONSE OVERALL
flat_side_distance_between_thick_and_thin_edges1.312 INCHES NOMINAL IN
NSN5310-01-306-4866
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 709-5486672 PC 102 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: BEVEL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/7,H32 FED SPEC 1ST MATERIAL RESPONSE OR ASTM B209,H116,CAGEC 53711 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
MAJOR THICKNESS: 0.438 INCHES NOMINAL IN
•
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES: 1.312 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5456 OVERALL
•
HOLE DIAMETER: 0.531 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORBEVEL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/7,H32 FED SPEC 1ST MATERIAL RESPONSE OR ASTM B209,H116,CAGEC 53711 ASSN STD 2ND MATERIAL RESPONSE OVERALL
OVERALL WIDTH2.125 INCHES NOMINAL IN
MAJOR THICKNESS0.438 INCHES NOMINAL IN
SPECIAL FEATURESH117 IS ALSO INCLUDED FOR ALUMINUM 5456 HEAT TREATMENT
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES1.312 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5456 OVERALL
HOLE DIAMETER0.531 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
5486672Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 709-5486672 PC 102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 709-5486672 PC 102?
709-5486672 PC 102 is a WASHER,BEVEL.
What parts can replace 709-5486672 PC 102?
There is 1 known substitute for 709-5486672 PC 102: 5486672. Substitute compatibility should be verified for your specific system.
What is the NSN for 709-5486672 PC 102?
709-5486672 PC 102 is cataloged in the U.S. Government catalog under NSN 5310-01-306-4866. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 709-5486672 PC 102

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.