PartsTable
Technical Data Sheet
Download PDF

709-4684911PC10 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

709-4684911PC10: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.750 INCHES NOMINAL IN, material: STEEL COMP 304 OVERALL, overall_length: 2.125 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OVERALL, undercut_width: 0.250 INCHES NOMINAL IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-070-6487, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
709-4684911PC10
NSN: 5315-01-070-6487
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter0.750 INCHES NOMINAL IN
materialSTEEL COMP 304 OVERALL
overall_length2.125 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OVERALL
undercut_width0.250 INCHES NOMINAL IN
first_end_styleCHAMFERED
effective_length1.725 INCHES NOMINAL IN
style_designatorGROOVE
undercut_diameter0.625 INCHES NOMINAL IN
first_end_locationBOTH ENDS
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.060 INCHES NOMINAL IN
NSN5315-01-070-6487
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 709-4684911PC10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
UNDERCUT WIDTH: 0.250 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.625 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
STYLE DESIGNATOR: GROOVE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-736,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
UNDERCUT WIDTH0.250 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.060 INCHES NOMINAL IN
UNDERCUT DIAMETER0.625 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
STYLE DESIGNATORGROOVE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-736,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.750 INCHES NOMINAL IN
OVERALL LENGTH2.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
709-4684911 ITEM 10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 709-4684911PC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 709-4684911PC10?
709-4684911PC10 is a PIN,GROOVED,HEADLESS.
What parts can replace 709-4684911PC10?
There is 1 known substitute for 709-4684911PC10: 709-4684911 ITEM 10. Substitute compatibility should be verified for your specific system.
What is the NSN for 709-4684911PC10?
709-4684911PC10 is cataloged in the U.S. Government catalog under NSN 5315-01-070-6487. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 709-4684911PC10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.