PartsTable
Technical Data Sheet
Download PDF

709-4684875 ITEM 5 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

709-4684875 ITEM 5: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, hole_diameter: 0.281 INCHES NOMINAL IN, body_thickness: 0.125 INCHES NOMINAL IN, outside_diameter: 4.400 INCHES NOMINAL IN, special_features: CENTER HOLE 1.650 ID, bolt_circle_diameter: 3.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-120-8228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
709-4684875 ITEM 5
NSN: 5340-01-120-8228
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
hole_diameter0.281 INCHES NOMINAL IN
body_thickness0.125 INCHES NOMINAL IN
outside_diameter4.400 INCHES NOMINAL IN
special_featuresCENTER HOLE 1.650 ID
bolt_circle_diameter3.875 INCHES NOMINAL IN
securing_device_typeSPECIAL
bolt_circle_hole_quantity4
cross-sectional_shape_styleFLAT, SQUARE OR RECTANGULAR RIB REINFORCED
mounting_opening_shape_styleUNTHREADED HOLE
NSN5340-01-120-8228
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 709-4684875 ITEM 5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT CIRCLE HOLE QUANTITY: 4
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
CROSS-SECTIONAL SHAPE STYLE: FLAT, SQUARE OR RECTANGULAR RIB REINFORCED
•
OUTSIDE DIAMETER: 4.400 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: SPECIAL
•
BOLT CIRCLE DIAMETER: 3.875 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
BOLT CIRCLE HOLE QUANTITY4
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
CROSS-SECTIONAL SHAPE STYLEFLAT, SQUARE OR RECTANGULAR RIB REINFORCED
OUTSIDE DIAMETER4.400 INCHES NOMINAL IN
SECURING DEVICE TYPESPECIAL
BOLT CIRCLE DIAMETER3.875 INCHES NOMINAL IN
SPECIAL FEATURESCENTER HOLE 1.650 ID
MATERIALSTEEL CORROSION RESISTING
HOLE DIAMETER0.281 INCHES NOMINAL IN
BODY THICKNESS0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
87832-1604Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
709-4684875Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 709-4684875 ITEM 5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 709-4684875 ITEM 5?
709-4684875 ITEM 5 is a COVER,ACCESS.
What parts can replace 709-4684875 ITEM 5?
There are 2 known substitutes for 709-4684875 ITEM 5: 87832-1604, 709-4684875. Substitute compatibility should be verified for your specific system.
What is the NSN for 709-4684875 ITEM 5?
709-4684875 ITEM 5 is cataloged in the U.S. Government catalog under NSN 5340-01-120-8228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 709-4684875 ITEM 5