PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 708LX-2
708LX-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include length: 1.969 INCHES NOMINAL IN, material: STEEL OVERALL, material_thickness: 0.050 INCHES NOMINAL IN, material_document_and_classification: AISI 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-610-7798, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
708LX-2
NSN: 5340-00-610-7798
FSC: 5340
CAGE: 27361 — BURKE PRODUCTS INC (USA)
SPECIFICATIONS
length1.969 INCHES NOMINAL IN
materialSTEEL OVERALL
material_thickness0.050 INCHES NOMINAL IN
material_document_and_classificationAISI 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-610-7798
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 708LX-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
LENGTH: 1.969 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
LENGTH1.969 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
52-549Interchangeable
interchangeable cross-reference
interchangeable
3438721Interchangeable
interchangeable cross-reference
interchangeable
11917-2Interchangeable
interchangeable cross-reference
interchangeable
S-52549Interchangeable
interchangeable cross-reference
interchangeable
152842Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 708LX-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 708LX-2?
708LX-2 is a CLIP,SPRING TENSION.
What parts can replace 708LX-2?
There are 5 known substitutes for 708LX-2: 52-549, 3438721, 11917-2 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 708LX-2?
708LX-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-610-7798. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 708LX-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026