708D1MP154PJ800AX — CAPACITOR,FIXED,PLASTIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

708D1MP154PJ800AX: CAPACITOR,FIXED,PLASTIC DIELECTR.

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.719 INCHES MAXIMUM IN, body_diameter: 0.315 INCHES MAXIMUM IN, terminal_length: 1.625 INCHES MINIMUM IN, terminal_diameter: 0.025 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-013-8297, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 708D1MP154PJ800AX

NSN: 5910-01-013-8297
FSC: 5910 — Capacitors
CAGE: 56699 — BC COMPONENTS (USA)

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES, AXIAL TERMINALS
body_length	0.719 INCHES MAXIMUM IN
body_diameter	0.315 INCHES MAXIMUM IN
terminal_length	1.625 INCHES MINIMUM IN
terminal_diameter	0.025 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
tolerance_range_per_section	-5.00 TO 5.00 PERCENT SINGLE SECTION
schematic_diagram_designator	NO COMMON OR GROUNDED ELECTRODE(S)
NSN	5910-01-013-8297

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.315 INCHES MAXIMUM IN

•

TERMINAL DIAMETER: 0.025 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES, AXIAL TERMINALS

•

TOLERANCE RANGE PER SECTION: -5.00 TO 5.00 PERCENT SINGLE SECTION

•

POWER FACTOR AT REFERENCE TEMP IN PERCENT: 0.5000

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.625 INCHES MINIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.315 INCHES MAXIMUM IN
TERMINAL DIAMETER	0.025 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES, AXIAL TERMINALS
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION
POWER FACTOR AT REFERENCE TEMP IN PERCENT	0.5000
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.625 INCHES MINIMUM IN
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	80.0 DC SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)

SUBSTITUTES & CROSS-REFERENCES 2

AE22R154JReference document

Same NSN cross-reference

Reference document — Secondary reference

806694Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 708D1MP154PJ800AX?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 708D1MP154PJ800AX?

708D1MP154PJ800AX is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace 708D1MP154PJ800AX?

There are 2 known substitutes for 708D1MP154PJ800AX: AE22R154J, 806694. Substitute compatibility should be verified for your specific system.

What is the NSN for 708D1MP154PJ800AX?

708D1MP154PJ800AX is cataloged in the U.S. Government catalog under NSN 5910-01-013-8297. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

708D1MP154PJ800AX — CAPACITOR,FIXED,PLASTIC DIELECTR

Request a Quote — 708D1MP154PJ800AX