PartsTable
Technical Data Sheet
Download PDF

7089678 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7089678: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.562 INCHES NOMINAL IN, aperture_width: 2.312 INCHES NOMINAL IN, overall_length: 5.562 INCHES NOMINAL IN, aperture_length: 4.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-641-4107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7089678
NSN: 5330-00-641-4107
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.562 INCHES NOMINAL IN
aperture_width2.312 INCHES NOMINAL IN
overall_length5.562 INCHES NOMINAL IN
aperture_length4.312 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-641-4107
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7089678 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 2.312 INCHES NOMINAL IN
•
APERTURE LENGTH: 4.312 INCHES NOMINAL IN
•
MATERIAL: PAPER OVERALL
•
HOLE DIAMETER: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
OVERALL LENGTH5.562 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.562 INCHES NOMINAL IN
APERTURE WIDTH2.312 INCHES NOMINAL IN
APERTURE LENGTH4.312 INCHES NOMINAL IN
MATERIALPAPER OVERALL
HOLE DIAMETER0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 3
9285Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H9285Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
399976Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7089678?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7089678?
7089678 is a GASKET.
What parts can replace 7089678?
There are 3 known substitutes for 7089678: 9285, H9285, 399976. Substitute compatibility should be verified for your specific system.
What is the NSN for 7089678?
7089678 is cataloged in the U.S. Government catalog under NSN 5330-00-641-4107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7089678

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.