PartsTable
Technical Data Sheet
Download PDF

70850 — TRANSPORT,MAGNETIC TAPE

✓ Government record, cited
Rexel · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

70850: TRANSPORT,MAGNETIC TAPE.

Available in packs of 50, Rexel 80x50mm Fasteners are the most popular fasteners in the world. Solid stainless steel, they are ideal for bundling perforated documents up to 8cm thick. - The most popular fasteners in the world - Made of solid stainless steel - For bundling of 8 cm perforated documents - Capacity: approx.

50 mm This part is cataloged in the U.S. Government catalog under NSN 5306-00-089-1425, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 70850
NSN: 5306-00-089-1425
NIINs: 000891425, 012808143, 014216135, 014660497, 015050580
FSC: 5306 — Bolts
CAGE: 80049 — DEPARTMENT OF THE AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleROUND
neck_width0.492 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
head_height0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
neck_length0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
thread_class2A A
head_diameter1.032 INCHES MINIMUM AND 1.094 INCHES MAXIMUM IN
thread_length1.250 INCHES MINIMUM IN
fastener_length4.900 INCHES MINIMUM AND 5.100 INCHES MAXIMUM IN
hardness_rating95.0 ROCKWELL B MAXIMUM OVERALL
special_featuresRDX EXPLOSIVE SOIL TEST; 20 TEST KIT WITH EXTRACTION JARS
thread_directionRIGHT-HAND
NSN5306-00-089-1425
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 70850 Rexel NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 70850 MFR Rexel
KEY FEATURES
•
NECK LENGTH: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
FASTENER LENGTH: 4.900 INCHES MINIMUM AND 5.100 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.250 INCHES MINIMUM IN
•
HARDNESS RATING: 95.0 ROCKWELL B MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
NECK LENGTH0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
FASTENER LENGTH4.900 INCHES MINIMUM AND 5.100 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM-B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.250 INCHES MINIMUM IN
HARDNESS RATING95.0 ROCKWELL B MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 8
MS35751-137Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-B-584 TY1CL1STAGR1Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-B-584Reference document
Same NSN cross-reference
Reference document — Secondary reference
FFB5841-2-13X5INB0LTSQNECKReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
NASM35751Reference document
Same NSN cross-reference
Reference document — Secondary reference
B18.5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 70850?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70850?
70850 is a TRANSPORT,MAGNETIC TAPE manufactured by Rexel. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 70850?
There are 8 known substitutes for 70850: MS35751-137, FF-B-584 TY1CL1STAGR1, FF-B-584 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70850?
70850 is cataloged in the U.S. Government catalog under NSN 5306-00-089-1425. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70850

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.