PartsTable
Technical Data Sheet
Download PDF

7084990 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7084990: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include knuckle_type: FRICTION, pin_diameter: 0.250 INCHES NOMINAL IN, overall_length: 77.000 INCHES NOMINAL IN, knuckle_quantity: 39, performance_type: NOT RATED, pin_removability: NONREMOVABLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-158-4077, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7084990
NSN: 5340-00-158-4077
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
knuckle_typeFRICTION
pin_diameter0.250 INCHES NOMINAL IN
overall_length77.000 INCHES NOMINAL IN
knuckle_quantity39
performance_typeNOT RATED
pin_removabilityNONREMOVABLE
material_thickness0.063 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
mounting_hole_diameter0.281 INCHES NOMINAL IN
mounting_hole_quantity31
pin_center_to_body_edge_distance1.500 INCHES NOMINAL IN
NSN5340-00-158-4077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7084990 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.250 INCHES NOMINAL IN
•
MOUNTING HOLE QUANTITY: 31
•
REVERSIBLE FEATURE: NOT INCLUDED
•
MOUNTING HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 1.500 INCHES NOMINAL IN
•
HINGE MOUNTING TYPE: FULL SURFACE
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.250 INCHES NOMINAL IN
MOUNTING HOLE QUANTITY31
REVERSIBLE FEATURENOT INCLUDED
MOUNTING HOLE DIAMETER0.281 INCHES NOMINAL IN
OVERALL LENGTH77.000 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE1.500 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL SURFACE
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
PIN REMOVABILITYNONREMOVABLE
KNUCKLE QUANTITY39
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7084990?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7084990?
7084990 is a HINGE,BUTT.
What is the NSN for 7084990?
7084990 is cataloged in the U.S. Government catalog under NSN 5340-00-158-4077. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7084990