PartsTable
Technical Data Sheet
Download PDF

7084861 — CABLE ASSEMBLY,SPECIAL PURPOSE,E

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7084861: CABLE ASSEMBLY,SPECIAL PURPOSE,E.

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 1.250 INCHES NOMINAL IN, first_leg_length: 1.250 INCHES NOMINAL IN, second_leg_style: SQUARE, second_leg_width: 1.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-419-9464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7084861
NSN: 5340-00-419-9464
NIINs: 004199464, 014967554
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width1.250 INCHES NOMINAL IN
first_leg_length1.250 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.250 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.250 INCHES NOMINAL IN
first_leg_thickness0.125 INCHES NOMINAL IN
second_leg_thickness0.125 INCHES NOMINAL IN
end_item_identification53711)7084810 UNIT 8, CONSOLE, TACTICAL EQUIPMENT
first_leg_corner_radius0.500 INCHES NOMINAL IN
NSN5340-00-419-9464
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7084861 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.313 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
•
FIRST LEG CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.250 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.250 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.313 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.313 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.125 INCHES MINIMUM AND 0.175 INCHES MAXIMUM IN
FIRST LEG CORNER RADIUS0.500 INCHES NOMINAL IN
SECOND LEG WIDTH1.250 INCHES NOMINAL IN
SECOND LEG LENGTH1.250 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.313 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
FIRST LEG STYLECORNER RADIUS
SECOND LEG THICKNESS0.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7084861?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7084861?
7084861 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What is the NSN for 7084861?
7084861 is cataloged in the U.S. Government catalog under NSN 5340-00-419-9464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7084861

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.