PartsTable
Technical Data Sheet
Download PDF

70826 — O-RING

✓ Government record, cited
schleich · BOLT SCREW
PRODUCT OVERVIEW

70826: O-RING.

The Ice Bug stares at its opponent with cold eyes. It has sharp claws and transparent ice crystals on its back, which are razor sharp! But the Fire Kraken will not be intimidated.

It waves its suction arms, looking like it's on fire. At the end of each tentacle it has dangerous pincers. It simply burns up its opponents.

I wonder who will emerge victorious from the battle of these creepy action figures? Ice World vs. Lava World!

It looks dangerous when the Ice Bug and the Fire Kraken fight each other. I wonder who is the stronger of the two? It's hard to tell, because they both look so scary.

The Ice Bug keeps trying to grab the Fire Kraken with its sharp claws. But it defends itself with its flaming tentacles. The Ice Bug tries to dodge its countless suction arms, because they burn like fire and have dangerous pincers at the ends.

This will be some fight! This part is cataloged in the U.S. Government catalog under NSN 5305-00-340-5400, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
70826
NSN: 5305-00-340-5400
NIINs: 003405400, 005073271, 014659377
FSC: 5305 — Screws
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
end_item_identificationOIL CENTRIFUGAL CLEANING UNIT
NSN5305-00-340-5400
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 70826 · schleich ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT DIAMETER: 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
POINT LENGTH: 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.406 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.063 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: BALL
TECHNICAL CHARACTERISTICS
POINT DIAMETER0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
POINT LENGTH0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
FASTENER LENGTH1.406 INCHES MINIMUM AND 1.421 INCHES MAXIMUM IN
THREAD LENGTH1.063 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEBALL
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 3
0720579Reference document
Same NSN cross-reference
Reference document — Secondary reference
99727Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
39796Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
Manufacturer release date (catalog record)2024-07-01
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 70826?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70826?
70826 is a O-RING manufactured by schleich.
What parts can replace 70826?
There are 3 known substitutes for 70826: 0720579, 99727, 39796. Substitute compatibility should be verified for your specific system.
What is the NSN for 70826?
70826 is cataloged in the U.S. Government catalog under NSN 5305-00-340-5400. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70826