PartsTable
Technical Data Sheet
Download PDF

7080-21-241-0103 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7080-21-241-0103: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075, first_leg_style: CORNER RADIUS, first_leg_width: 20.000 INCHES NOMINAL IN, first_leg_length: 1.060 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 1.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-141-7614, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7080-21-241-0103
NSN: 5340-01-141-7614
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075
first_leg_styleCORNER RADIUS
first_leg_width20.000 INCHES NOMINAL IN
first_leg_length1.060 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.750 INCHES NOMINAL IN
first_leg_thickness0.063 INCHES NOMINAL IN
second_leg_thickness0.063 INCHES NOMINAL IN
first_leg_corner_radius0.340 INCHES NOMINAL IN
first_leg_hole_diameter0.310 INCHES NOMINAL IN
first_leg_hole_arrangement_styleTHREE HOLES
material_document_and_classificationQQ-A-250/13 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-141-7614
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7080-21-241-0103 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.310 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
FIRST LEG CORNER RADIUS: 0.340 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.750 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: THREE HOLES
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: CORNER RADIUS
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.310 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
FIRST LEG CORNER RADIUS0.340 INCHES NOMINAL IN
SECOND LEG LENGTH1.750 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETHREE HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLECORNER RADIUS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/13 FED SPEC SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.063 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7080-21-241-0103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7080-21-241-0103?
7080-21-241-0103 is a BRACKET,ANGLE.
What is the NSN for 7080-21-241-0103?
7080-21-241-0103 is cataloged in the U.S. Government catalog under NSN 5340-01-141-7614. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7080-21-241-0103

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.