70755 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

schleich · MRO · MRO_GENERAL

PRODUCT OVERVIEW

70755: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_width: 0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, body_height: 0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, body_length: 0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN, corner_shape: SQUARE INSIDE RIGHT CORNER, cubic_measure: 0.133 CUBIC INCHES, terminal_type: TAB, SOLDER LUG. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-325-9264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 70755

NSN: 5905-00-325-9264
NIINs: 003259264, 008253910
FSC: 5905 — Resistor
CAGE: 83311 — UNISON INDUSTRIES, LLC DBA UNISON INDUSTRIES INC (USA)

SPECIFICATIONS

body_width	0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
body_height	0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
body_length	0.688 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
corner_shape	SQUARE INSIDE RIGHT CORNER
cubic_measure	0.133 CUBIC INCHES
terminal_type	TAB, SOLDER LUG
inclosure_type	ENCASED
overall_length	0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM IN
terminal_width	0.140 INCHES MINIMUM IN
terminal_length	0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
special_features	CHAMFERS ARE SURFACE-FINISHED TO APPROX. 225 MICROINCHES
style_designator	SOLID, PLAIN, NO OUTSIDE FLANGES
NSN	5905-00-325-9264

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -30.0 TO 30.0

•

ELECTRICAL RESISTANCE: 1.000 KILOHMS

•

INCLOSURE TYPE: ENCASED

•

MOUNTING HOLE SIZE: 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN

•

TERMINAL TYPE: TAB, SOLDER LUG

•

DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN

•

TERMINAL LENGTH: 0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-30.0 TO 30.0
ELECTRICAL RESISTANCE	1.000 KILOHMS
INCLOSURE TYPE	ENCASED
MOUNTING HOLE SIZE	0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM IN
TERMINAL TYPE	TAB, SOLDER LUG
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
TERMINAL LENGTH	0.250 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
BODY WIDTH	0.376 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
BODY HEIGHT	0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 9

RH10-1K10WReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-PRF-39009/1Reference document

Same NSN cross-reference

Reference document — Identification reference

RF65G1001Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

10630283-241Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

3010M1000-1Reference document

Same NSN cross-reference

Reference document — Secondary reference

443-1606-460Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 70755?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 70755?

70755 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by schleich. It is classified as a MRO (MRO_GENERAL).

What parts can replace 70755?

There are 9 known substitutes for 70755: RH10-1K10W, MIL-PRF-39009/1, RF65G1001 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 70755?

70755 is cataloged in the U.S. Government catalog under NSN 5905-00-325-9264. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

70755 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — 70755