PartsTable
Technical Data Sheet
PartsTable / O-RING / 707524-008
707524-008 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN, center_hole_diameter: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-482-1596, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
707524-008
NSN: 5331-00-482-1596
FSC: 5331 — O-RING
CAGE: 05CK7 — WINTEC LLC (USA)
SPECIFICATIONS
materialRUBBER
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
outside_diameter0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
center_hole_diameter0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-482-1596
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 707524-008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER
•
CENTER HOLE DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER
CENTER HOLE DIAMETER0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER0.305 INCHES MINIMUM AND 0.327 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
5253-635Interchangeable
interchangeable cross-reference
interchangeable
276Interchangeable
interchangeable cross-reference
interchangeable
AS568B-008Interchangeable
interchangeable cross-reference
interchangeable
VV119Interchangeable
interchangeable cross-reference
interchangeable
81635Interchangeable
interchangeable cross-reference
interchangeable
19-8-3236Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 707524-008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 707524-008?
707524-008 is a O-RING.
What parts can replace 707524-008?
There are 31 known substitutes for 707524-008: 5253-635, 276, AS568B-008 and 28 more. Substitute compatibility should be verified for your specific system.
Is 707524-008 still available?
707524-008 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 707524-008

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026