PartsTable
Technical Data Sheet
Download PDF

707076 — CUP,TAPERED ROLLER BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

707076: CUP,TAPERED ROLLER BEARING.

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: COPPER OVERALL, hole_diameter: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, shoulder_height: 0.051 INCHES NOMINAL IN, outside_diameter: 0.312 INCHES NOMINAL IN, style_designator: SHOULDERED, shoulder_diameter: 0.235 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-142-4414, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
707076
NSN: 3110-00-142-4414
NIINs: 001424414, 004100628
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialCOPPER OVERALL
hole_diameter0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
shoulder_height0.051 INCHES NOMINAL IN
outside_diameter0.312 INCHES NOMINAL IN
style_designatorSHOULDERED
shoulder_diameter0.235 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
material_thickness0.040 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
material_document_and_classificationQQ-B-611 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3110-00-142-4414
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 707076 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
OUTSIDE DIAMETER: 2.7500 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0990 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.7314 INCHES NOMINAL IN
OUTSIDE DIAMETER2.7500 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0990 INCHES NOMINAL IN
SPECIAL FEATURESBACK FACE CORNER CHAMFERED BY 33 DEG
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
147K1Reference document
Same NSN cross-reference
Reference document — Secondary reference
38XReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 707076?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 707076?
707076 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 707076?
There are 2 known substitutes for 707076: 147K1, 38X. Substitute compatibility should be verified for your specific system.
What is the NSN for 707076?
707076 is cataloged in the U.S. Government catalog under NSN 3110-00-142-4414. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 707076