PartsTable
Technical Data Sheet
Download PDF

7070-02-044-8115 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7070-02-044-8115: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, fork_depth: 2.250 INCHES NOMINAL IN, hole_diameter: 0.281 INCHES NOMINAL IN, overall_width: 0.788 INCHES NOMINAL IN, shank_diameter: 1.250 INCHES NOMINAL IN, fork_span_width: 0.412 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-115-3904, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7070-02-044-8115
NSN: 5340-01-115-3904
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
fork_depth2.250 INCHES NOMINAL IN
hole_diameter0.281 INCHES NOMINAL IN
overall_width0.788 INCHES NOMINAL IN
shank_diameter1.250 INCHES NOMINAL IN
fork_span_width0.412 INCHES NOMINAL IN
special_featuresONE PIVOT HOLE 0.125 IN. DIA IN
style_designatorCLEVIS
fork_arm_thickness0.188 INCHES NOMINAL IN
securing_pin_hole_diameter0.316 INCHES NOMINAL IN
material_document_and_classificationQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_center_of_securing_pin_hole_to_rod_end0.620 INCHES NOMINAL IN
NSN5340-01-115-3904
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7070-02-044-8115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.250 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.412 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN SECOND AND THIRD HOLES: 0.690 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.316 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.188 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.250 INCHES NOMINAL IN
FORK SPAN WIDTH0.412 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN SECOND AND THIRD HOLES0.690 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.316 INCHES NOMINAL IN
FORK ARM THICKNESS0.188 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.788 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.500 INCHES NOMINAL IN
SPECIAL FEATURESONE PIVOT HOLE 0.125 IN. DIA IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 7070-02-044-8115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7070-02-044-8115?
7070-02-044-8115 is a CLEVIS,ROD END.
What is the NSN for 7070-02-044-8115?
7070-02-044-8115 is cataloged in the U.S. Government catalog under NSN 5340-01-115-3904. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7070-02-044-8115

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.