PartsTable
Technical Data Sheet
Download PDF

706855-116 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

706855-116: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, rim_surface_width: 0.094 INCHES NOMINAL IN, peripheral_diameter: 0.925 INCHES NOMINAL IN, center_hole_diameter: 0.742 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN, cross-sectional_height: 0.241 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-104-5108, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
706855-116
NSN: 5330-00-104-5108
FSC: 5330 — Packing and Gasket Materials
CAGE: 0K9K5 — SPECIALTY & BALL VALVE ENGINEERING, INC. DBA SPECIALTY & BALL VALVE ENGINEERING (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
rim_surface_width0.094 INCHES NOMINAL IN
peripheral_diameter0.925 INCHES NOMINAL IN
center_hole_diameter0.742 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
cross-sectional_height0.241 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleFLANGE
NSN5330-00-104-5108
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 706855-116 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.241 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.094 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
PERIPHERAL DIAMETER: 0.925 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.742 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.241 INCHES NOMINAL IN
RIM SURFACE WIDTH0.094 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
PERIPHERAL DIAMETER0.925 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.742 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
706855Reference document
Same NSN cross-reference
Reference document — Secondary reference
706320-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 706855-116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 706855-116?
706855-116 is a RETAINER,PACKING.
What parts can replace 706855-116?
There are 2 known substitutes for 706855-116: 706855, 706320-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 706855-116?
706855-116 is cataloged in the U.S. Government catalog under NSN 5330-00-104-5108. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 706855-116