PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7064418
7064418 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_class: 1A A, thread_length: 1.000 INCHES NOMINAL IN, overall_length: 0.313 INCHES NOMINAL IN, end_pressure_rating: 9.000 POUNDS NOMINAL LBS, nominal_thread_size: 0.3125 INCHES IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-584-6469, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7064418
NSN: 5340-00-584-6469
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
shapeROUND
thread_class1A A
thread_length1.000 INCHES NOMINAL IN
overall_length0.313 INCHES NOMINAL IN
end_pressure_rating9.000 POUNDS NOMINAL LBS
nominal_thread_size0.3125 INCHES IN
thread_quantity_per_inch18
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-00-584-6469
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7064418 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.3125 INCHES IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SHAPE: ROUND
•
END PRESSURE RATING: 9.000 POUNDS NOMINAL LBS
•
THREAD QUANTITY PER INCH: 18
•
THREAD CLASS: 1A A
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.3125 INCHES IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SHAPEROUND
OVERALL LENGTH0.313 INCHES NOMINAL IN
END PRESSURE RATING9.000 POUNDS NOMINAL LBS
THREAD QUANTITY PER INCH18
THREAD CLASS1A A
THREAD LENGTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
36-005600Interchangeable
interchangeable cross-reference
interchangeable
6X297Interchangeable
interchangeable cross-reference
interchangeable
WMAV56Interchangeable
interchangeable cross-reference
interchangeable
A-A-59334TYISTBSW10SZ30Interchangeable
interchangeable cross-reference
interchangeable
S56Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 38Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7064418?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7064418?
7064418 is a PLUNGER,QUICK RELEASE.
What parts can replace 7064418?
There are 13 known substitutes for 7064418: 36-005600, 6X297, WMAV56 and 10 more. Substitute compatibility should be verified for your specific system.
Is 7064418 still available?
7064418 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7064418

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026