PartsTable
Technical Data Sheet
Download PDF

706131 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

706131: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.200 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.120 INCHES NOMINAL IN, aperture_width: 5.000 INCHES NOMINAL IN, overall_length: 6.060 INCHES NOMINAL IN, aperture_length: 4.940 INCHES NOMINAL IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-124-0467, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
706131
NSN: 5330-01-124-0467
NIINs: 011240467, 012876543
FSC: 5330 — Packing and Gasket Materials
CAGE: 35012 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
hole_diameter0.200 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.120 INCHES NOMINAL IN
aperture_width5.000 INCHES NOMINAL IN
overall_length6.060 INCHES NOMINAL IN
aperture_length4.940 INCHES NOMINAL IN
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
bolt_hole_quantity10
inside_corner_radius0.120 INCHES NOMINAL IN
outside_corner_radius0.120 INCHES NOMINAL IN
cross-sectional_thickness0.063 INCHES NOMINAL IN
NSN5330-01-124-0467
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 706131 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.120 INCHES NOMINAL IN
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
APERTURE WIDTH: 5.000 INCHES NOMINAL IN
•
APERTURE LENGTH: 4.940 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 10
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.063 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.120 INCHES NOMINAL IN
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
OVERALL LENGTH6.060 INCHES NOMINAL IN
OVERALL WIDTH6.120 INCHES NOMINAL IN
APERTURE WIDTH5.000 INCHES NOMINAL IN
APERTURE LENGTH4.940 INCHES NOMINAL IN
BOLT HOLE QUANTITY10
OUTSIDE CORNER RADIUS0.120 INCHES NOMINAL IN
HOLE DIAMETER0.200 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 706131?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 706131?
706131 is a GASKET.
What is the NSN for 706131?
706131 is cataloged in the U.S. Government catalog under NSN 5330-01-124-0467. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 706131

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.