PartsTable
Technical Data Sheet
Download PDF

7061145 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7061145: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include thickness: 0.125 INCHES NOMINAL IN, hole_diameter: 0.453 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN, overall_diameter: 1.547 INCHES MINIMUM AND 1.578 INCHES MAXIMUM IN, surface_treatment: CADMIUM OR ZINC OVERALL, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-706-1145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7061145
NSN: 5310-00-706-1145
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
thickness0.125 INCHES NOMINAL IN
hole_diameter0.453 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
overall_diameter1.547 INCHES MINIMUM AND 1.578 INCHES MAXIMUM IN
surface_treatmentCADMIUM OR ZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5310-00-706-1145
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7061145 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
OVERALL DIAMETER: 1.547 INCHES MINIMUM AND 1.578 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
OVERALL DIAMETER1.547 INCHES MINIMUM AND 1.578 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1012 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.453 INCHES MINIMUM AND 0.484 INCHES MAXIMUM IN
THICKNESS0.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
92P3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7061145?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7061145?
7061145 is a WASHER,FLAT.
What parts can replace 7061145?
There is 1 known substitute for 7061145: 92P3. Substitute compatibility should be verified for your specific system.
What is the NSN for 7061145?
7061145 is cataloged in the U.S. Government catalog under NSN 5310-00-706-1145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7061145

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.