PartsTable
Technical Data Sheet
Download PDF

706045 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

706045: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: RUBBER SYNTHETIC OVERALL, temp_rating: 350.0 FAHRENHEIT DEGF, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL, inner_groove_width: 0.156 INCHES NOMINAL IN, outer_groove_depth: 0.188 INCHES NOMINAL IN, outer_groove_width: 0.094 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-242-1992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 706045
NSN: 5330-00-242-1992
NIINs: 002421992, 009391450, 012874256
FSC: 5330 — Packing and Gasket Materials
CAGE: 21444 — REXNORD INDUSTRIES LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
temp_rating350.0 FAHRENHEIT DEGF
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL
inner_groove_width0.156 INCHES NOMINAL IN
outer_groove_depth0.188 INCHES NOMINAL IN
outer_groove_width0.094 INCHES NOMINAL IN
peripheral_diameter2.156 INCHES NOMINAL IN
center_hole_diameter1.797 INCHES NOMINAL IN
fsc_application_dataTURBO JET ENGINE,ACFT
cross-sectional_height0.312 INCHES NOMINAL IN
end_item_identificationMODELS J6-T-25,J69-T-29,J69-T-41A TEST EQUIPMENT,ACFT A
cross-sectional_shape_styleSPECIAL
NSN5330-00-242-1992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 706045 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER GROOVE DEPTH: 0.188 INCHES NOMINAL IN
•
TEMP RATING: 350.0 FAHRENHEIT DEGF
•
OUTER GROOVE SMALLEST WIDTH: 0.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 2.156 INCHES NOMINAL IN
•
OUTER GROOVE WIDTH: 0.094 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER GROOVE DEPTH0.188 INCHES NOMINAL IN
TEMP RATING350.0 FAHRENHEIT DEGF
OUTER GROOVE SMALLEST WIDTH0.062 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 63.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER2.156 INCHES NOMINAL IN
OUTER GROOVE WIDTH0.094 INCHES NOMINAL IN
INNER GROOVE WIDTH0.156 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.797 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
125804Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
3057-12PC105Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 706045?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 706045?
706045 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 706045?
There are 2 known substitutes for 706045: 125804, 3057-12PC105. Substitute compatibility should be verified for your specific system.
What is the NSN for 706045?
706045 is cataloged in the U.S. Government catalog under NSN 5330-00-242-1992. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 706045

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.