PartsTable
Technical Data Sheet
Download PDF

7060-08-161-3101 — HANDLE,MANUAL CONTROL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7060-08-161-3101: HANDLE,MANUAL CONTROL.

The HANDLE,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 OVERALL, handle_height: 1.250 INCHES NOMINAL1.250 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN, overall_length: 4.500 INCHES NOMINAL4.500 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S)UNTHREADED HOLE(S), material_document_and_classification: QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-346-9883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7060-08-161-3101
NSN: 5340-01-346-9883
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 OVERALL
handle_height1.250 INCHES NOMINAL1.250 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
overall_length4.500 INCHES NOMINAL4.500 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)UNTHREADED HOLE(S)
special_featuresSPECIAL MARKINGS,WORDS PULL AND TURN WITH AN ARROW,TO BE FILLED W/BLUE PAINT,NO. 35237SPECIAL MARKINGS,WORDS PULL AND TURN WITH AN ARROW,TO BE FILLED W/BLUE PAINT,NO. 35237
material_document_and_classificationQQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-83286,PLASTIC,URETHANE MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-346-9883
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7060-08-161-3101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83286,PLASTIC,URETHANE MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HANDLE HEIGHT: 1.250 INCHES NOMINAL1.250 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 7075 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-83286,PLASTIC,URETHANE MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
HANDLE HEIGHT1.250 INCHES NOMINAL1.250 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.500 INCHES NOMINAL4.500 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
SPECIAL FEATURESSPECIAL MARKINGS,WORDS PULL AND TURN WITH AN ARROW,TO BE FILLED W/BLUE PAINT,NO. 35237SPECIAL MARKINGS,WORDS PULL AND TURN WITH AN ARROW,TO BE FILLED W/BLUE PAINT,NO. 35237
MATERIALALUMINUM ALLOY 7075 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7060-08-161-3101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7060-08-161-3101?
7060-08-161-3101 is a HANDLE,MANUAL CONTROL.
What is the NSN for 7060-08-161-3101?
7060-08-161-3101 is cataloged in the U.S. Government catalog under NSN 5340-01-346-9883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7060-08-161-3101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.