CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: STEEL CORROSION RESISTING ALL MATING ENDS FIFTH CONTACT GROUPING, overall_length: 115.750 INCHES IN, part_name_assigned_by_controlling_agency: CABLE ASSEMBLY FUEL CELL. This part is cataloged in the U.S.
Government catalog under NSN 6150-01-628-5778, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
7055-22-390-0102
NSN:6150-01-628-5778 FSC:6150 — Miscellaneous Electric Power and Distribution Equipment CAGE:78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
material
STEEL CORROSION RESISTING ALL MATING ENDS FIFTH CONTACT GROUPING
overall_length
115.750 INCHES IN
part_name_assigned_by_controlling_agency
CABLE ASSEMBLY FUEL CELL
NSN
6150-01-628-5778
COMPONENT DIAGRAM
KEY FEATURES
•
SUPPLEMENTARY FEATURES: INTERNAL CONSTRUCTION MUST PREVENT WICKING OF FUEL IN ELECTRIC WIRE THRU FEED-THRU WHEN SUBJECTED TO 25PSI CONTINUOUS PRESSURE; CABLE TO BE DELIVERED WITH DUST CAP INSTALLED ON CONNECTOR; HI-POT CHECK WITH APPLIED POTENTIAL OF 55RMS 60HZ BETWEEN CONDUCTORS AND BETWEEN ANY CONDUCTOR AND GROUND; THERE SHALL BE NO EVIDENCE OF LEAKAGE OR BREAKDOWN; CONTINUITY CHECK REQUIRED BEFORE DELIVERY;CABLE AND CONNECTOR IDENT TO BE IMPRINTED ON BLACK HEAT SHRINKABLE TUBING WITH WHITE LETTERING USING A MARKING MACHINE;WIRE TO BE HELICAL LAY TO PROVIDE MAXIMUM FLEXIBILITY
•
MATERIAL: STEEL CORROSION RESISTING ALL MATING ENDS FIFTH CONTACT GROUPING
TYPICAL APPLICATIONS
Server Internal Cabling
Data Center Cable Infrastructure
SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
OVERALL LENGTH
115.750 INCHES IN
SUPPLEMENTARY FEATURES
INTERNAL CONSTRUCTION MUST PREVENT WICKING OF FUEL IN ELECTRIC WIRE THRU FEED-THRU WHEN SUBJECTED TO 25PSI CONTINUOUS PRESSURE; CABLE TO BE DELIVERED WITH DUST CAP INSTALLED ON CONNECTOR; HI-POT CHECK WITH APPLIED POTENTIAL OF 55RMS 60HZ BETWEEN CONDUCTORS AND BETWEEN ANY CONDUCTOR AND GROUND; THERE SHALL BE NO EVIDENCE OF LEAKAGE OR BREAKDOWN; CONTINUITY CHECK REQUIRED BEFORE DELIVERY;CABLE AND CONNECTOR IDENT TO BE IMPRINTED ON BLACK HEAT SHRINKABLE TUBING WITH WHITE LETTERING USING A MARKING MACHINE;WIRE TO BE HELICAL LAY TO PROVIDE MAXIMUM FLEXIBILITY
SPECIAL FEATURES
MOLDED SECTIONS TO BE OF BLACK EPOXY OR POLURETHANE THAT IS IMPERVIOUS TO EXPOSURE TO PETROLEUM; BASE FUELS AND OIL POTTING COMPOUND EC 2273 SHALL NOT BE USED; FEED-THRU TO BE SEALED FOR 25PSI WITHOUT VAPOR OR MOISTURE LEAK; CABLE TO WITHSTAND 50LB MECHANICAL FORCE WITHOUT BREAKING THE SEAL AT THE FEED-THRU; INNER PORTION OF FEED-THRU MUST SHOW NO EVIDENCE OF CONTINUOUS LEAKAGE WHEN SUBJECTED TO +25PSI USING MIL-STD-200 COND B BUBBLE TEST WITH STODDARD SOLVENT - 5MIN TEST LBS
PART NAME ASSIGNED BY CONTROLLING AGENCY
CABLE ASSEMBLY FUEL CELL
MATERIAL
STEEL CORROSION RESISTING ALL MATING ENDS FIFTH CONTACT GROUPING
OTHER ITEMS IN FSC 6150 — Miscellaneous Electric Power and Distribution Equipment
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7055-22-390-0102?
7055-22-390-0102 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What is the NSN for 7055-22-390-0102?
7055-22-390-0102 is cataloged in the U.S. Government catalog under NSN 6150-01-628-5778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.