PartsTable
Technical Data Sheet
Download PDF

7055-14-240-1046 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7055-14-240-1046: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 3.380 INCHES NOMINAL IN, first_leg_length: 0.810 INCHES NOMINAL IN, second_leg_style: SIDE RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-260-3095, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7055-14-240-1046
NSN: 5340-01-260-3095
FSC: 5340 — Hardware, Commercial
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width3.380 INCHES NOMINAL IN
first_leg_length0.810 INCHES NOMINAL IN
second_leg_styleSIDE RADIUS
second_leg_width3.380 INCHES NOMINAL IN
special_featuresITEM IS RIGHT HANDED,OPPOSITE P/N 70551-42 401-045
style_designatorANGLE
features_providedNUT
second_leg_length1.180 INCHES NOMINAL IN
surface_treatmentPLASTIC POLYURETHANE
NSN5340-01-260-3095
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7055-14-240-1046 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.380 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.1380 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.375 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 3.380 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.180 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.1380 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH2.375 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
FIRST LEG CORNER RADIUS0.250 INCHES NOMINAL IN
SECOND LEG WIDTH3.380 INCHES NOMINAL IN
SECOND LEG LENGTH1.180 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
STYLE DESIGNATORANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 7055-14-240-1046?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7055-14-240-1046?
7055-14-240-1046 is a BRACKET,ANGLE.
What is the NSN for 7055-14-240-1046?
7055-14-240-1046 is cataloged in the U.S. Government catalog under NSN 5340-01-260-3095. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7055-14-240-1046

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.