PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 705275
705275 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BRUSH,ELECTRICAL CONTACT is a the manufacturer industrial component. Key specifications include angle: 40.0 DEGREES NOMINAL, width: 1.250 INCHES NOMINAL IN, length: 1.250 INCHES NOMINAL IN, material: ELECTROGRAPHITIC, thickness: 0.625 INCHES NOMINAL IN, top_style: BEVELED FRONT WITH LEFT SHOULDER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
705275
NSN: 3110-00-100-0753
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
angle40.0 DEGREES NOMINAL
width1.250 INCHES NOMINAL IN
length1.250 INCHES NOMINAL IN
materialELECTROGRAPHITIC
thickness0.625 INCHES NOMINAL IN
top_styleBEVELED FRONT WITH LEFT SHOULDER
body_styleRECTANGULAR COMMUTATOR
cone_width0.9375 INCHES NOMINAL IN
bevel_angle30.0 DEGREES NOMINAL
bore_diameter1.3750 INCHES NOMINAL IN
peripheral_speed4000 FEET PER MINUTE FT
style_designatorONE PIECE
NSN3110-00-100-0753
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 705275 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
BORE DIAMETER: 1.3750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
CONE WIDTH: 0.9375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
BORE DIAMETER1.3750 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
CONE WIDTH0.9375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
SCD13465-7Interchangeable
interchangeable cross-reference
interchangeable
15519Interchangeable
interchangeable cross-reference
interchangeable
13465PT7Interchangeable
interchangeable cross-reference
interchangeable
300720Interchangeable
interchangeable cross-reference
interchangeable
RC20-4033GRADEAYInterchangeable
interchangeable cross-reference
interchangeable
61044541Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 705275?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 705275?
705275 is a BRUSH,ELECTRICAL CONTACT.
What parts can replace 705275?
There are 24 known substitutes for 705275: SCD13465-7, 15519, 13465PT7 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 705275?
705275 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 705275

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026