PartsTable
Technical Data Sheet
Download PDF

7052733 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7052733: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075, hole_diameter: 15.750 INCHES NOMINAL IN, outside_diameter: 17.188 INCHES NOMINAL IN, style_designator: ROUND, material_thickness: 2.662 INCHES NOMINAL IN, distance_from_centerline_to_hole_center: 7.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-481-8705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7052733
NSN: 5340-01-481-8705
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075
hole_diameter15.750 INCHES NOMINAL IN
outside_diameter17.188 INCHES NOMINAL IN
style_designatorROUND
material_thickness2.662 INCHES NOMINAL IN
distance_from_centerline_to_hole_center7.875 INCHES NOMINAL IN
NSN5340-01-481-8705
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7052733 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: ROUND
•
OUTSIDE DIAMETER: 17.188 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 2.662 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE TO HOLE CENTER: 7.875 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 7075
•
HOLE DIAMETER: 15.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORROUND
OUTSIDE DIAMETER17.188 INCHES NOMINAL IN
MATERIAL THICKNESS2.662 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE TO HOLE CENTER7.875 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 7075
HOLE DIAMETER15.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7052733?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7052733?
7052733 is a CLAMP,SYNCHRO.
What is the NSN for 7052733?
7052733 is cataloged in the U.S. Government catalog under NSN 5340-01-481-8705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7052733

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.