PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 705062
705062 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN, thread_length: 0.609 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0234, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
705062
NSN: 3110-00-100-0234
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
thread_length0.609 INCHES MINIMUM AND 0.691 INCHES MAXIMUM IN
fastener_length0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
minimum_yield_strength130000 POUNDS PER SQUARE INCH LBS
NSN3110-00-100-0234
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 705062 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
705062Interchangeable
interchangeable cross-reference
interchangeable
395AInterchangeable
interchangeable cross-reference
interchangeable
MILE1-922Interchangeable
interchangeable cross-reference
interchangeable
1-32512-6Interchangeable
interchangeable cross-reference
interchangeable
32512-6Interchangeable
interchangeable cross-reference
interchangeable
3506Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 705062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 705062?
705062 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 705062?
There are 16 known substitutes for 705062: 705062, 395A, MILE1-922 and 13 more. Substitute compatibility should be verified for your specific system.
Is 705062 still available?
705062 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 705062

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026