PartsTable
Technical Data Sheet
Download PDF

7050416 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7050416: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, material: STEEL COMP 1010 BAND, overall_width: 0.750 INCHES NOMINAL IN, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.063 INCHES NOMINAL IN, loop_inside_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-705-0416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7050416
NSN: 5340-00-705-0416
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.203 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
materialSTEEL COMP 1010 BAND
overall_width0.750 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.063 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
material_document_and_classificationQQ-S-627 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end3.813 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end0.938 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes2.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.688 INCHES NOMINAL IN
NSN5340-00-705-0416
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7050416 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-627 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.203 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 3.813 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 2.750 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-627 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.203 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END3.813 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES2.750 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.688 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 BAND
DISTANCE FROM LOOP CENTER TO SHORT TONGUE END0.938 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
203503Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7050416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7050416?
7050416 is a CLAMP,LOOP.
What parts can replace 7050416?
There is 1 known substitute for 7050416: 203503. Substitute compatibility should be verified for your specific system.
What is the NSN for 7050416?
7050416 is cataloged in the U.S. Government catalog under NSN 5340-00-705-0416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7050416

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.