PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 704AS9303-2
704AS9303-2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 1.1875 INCHES NOMINAL IN, overall_width: 1.0000 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-765-2100, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
704AS9303-2
NSN: 3110-00-765-2100
FSC: 3110
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter1.1875 INCHES NOMINAL IN
overall_width1.0000 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter1.5000 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-765-2100
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 704AS9303-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.1875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.5000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.1875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL OVERALL
OVERALL WIDTH1.0000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.5000 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
CX1961UInterchangeable
interchangeable cross-reference
interchangeable
B1916Interchangeable
interchangeable cross-reference
interchangeable
10005-0Interchangeable
interchangeable cross-reference
interchangeable
J0200XX-04Interchangeable
interchangeable cross-reference
interchangeable
VA-1884 PIECE 4Interchangeable
interchangeable cross-reference
interchangeable
20-602-76 ITEM NO 37Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 704AS9303-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 704AS9303-2?
704AS9303-2 is a BEARING,ROLLER,NEEDLE.
What parts can replace 704AS9303-2?
There are 7 known substitutes for 704AS9303-2: CX1961U, B1916, 10005-0 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 704AS9303-2?
704AS9303-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-765-2100. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 704AS9303-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026