PartsTable
Technical Data Sheet
Download PDF

704AS3454-2 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

704AS3454-2: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY C355.0 OR ALUMINUM ALLOY A356.0 OVERALL, end_radius: 0.625 INCHES NOMINAL IN, hole_diameter: 0.5007 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM IN, fork_span_width: 0.795 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN, surface_treatment: CHROMATE OVERALL, rod_connection_bore_depth: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-269-1663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
704AS3454-2
NSN: 5340-01-269-1663
FSC: 5340 — Hardware, Commercial
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialALUMINUM ALLOY C355.0 OR ALUMINUM ALLOY A356.0 OVERALL
end_radius0.625 INCHES NOMINAL IN
hole_diameter0.5007 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM IN
fork_span_width0.795 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
surface_treatmentCHROMATE OVERALL
rod_connection_bore_depth0.500 INCHES NOMINAL IN
rod_connection_bore_diameter0.376 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
material_document_and_classificationMIL-A-21180,ALLOY C355,CLASS 11,GRADE C MIL SPEC 1ST MATERIAL RESPONSE OR MIL-A-21180,ALLOY A356 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end2.136 INCHES NOMINAL IN
NSN5340-01-269-1663
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 704AS3454-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.795 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-A-21180,ALLOY C355,CLASS 11,GRADE C MIL SPEC 1ST MATERIAL RESPONSE OR MIL-A-21180,ALLOY A356 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: CHROMATE OVERALL
•
ROD CONNECTION BORE DIAMETER: 0.376 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
•
ROD CONNECTION BORE DEPTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY C355.0 OR ALUMINUM ALLOY A356.0 OVERALL
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.795 INCHES MINIMUM AND 0.805 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-21180,ALLOY C355,CLASS 11,GRADE C MIL SPEC 1ST MATERIAL RESPONSE OR MIL-A-21180,ALLOY A356 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCHROMATE OVERALL
ROD CONNECTION BORE DIAMETER0.376 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN
ROD CONNECTION BORE DEPTH0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY C355.0 OR ALUMINUM ALLOY A356.0 OVERALL
HOLE DIAMETER0.5007 INCHES MINIMUM AND 0.5010 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END2.136 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 704AS3454-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 704AS3454-2?
704AS3454-2 is a CLEVIS,ROD END.
What is the NSN for 704AS3454-2?
704AS3454-2 is cataloged in the U.S. Government catalog under NSN 5340-01-269-1663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 704AS3454-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.