PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70478

70478 — Technical Data Sheet

✓ Verified by PartsTable
schleich · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Surah is overjoyed. She has survived a great adventure and has found many new friends. Finally she can hold her sisters, princesses Eyela and Sera, in her arms again.

Her best friend is a small, brightly colored bird, which prefers to rest at her heart when it is not flying through the air. He is much more than just a small bird, however Surah guards the secret of her little darling as she has promised. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-108-1173, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
70478
NSN: 3110-01-108-1173
FSC: 3110
CAGE: 94764 — PETTIBONE MERCURY CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.5625 INCHES NOMINAL IN
outside_diameter2.4375 INCHES NOMINAL IN
special_featuresW/ PROVISION FOR MOUNTING
style_designatorNORMAL ANGLE
backface_corner_radius0.0780 INCHES NOMINAL IN
end_item_identificationUNITED TRACTOR MODEL CB40-C
standard_tolerance_designationAFBMA CLASS 2
NSN3110-01-108-1173
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 70478 · schleich ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BACKFACE CORNER RADIUS: 0.0780 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.4375 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BACKFACE CORNER RADIUS0.0780 INCHES NOMINAL IN
OVERALL WIDTH0.5625 INCHES NOMINAL IN
OUTSIDE DIAMETER2.4375 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
PA-2006Interchangeable
interchangeable cross-reference
interchangeable
1524-3Interchangeable
interchangeable cross-reference
interchangeable
146-030-0006Interchangeable
interchangeable cross-reference
interchangeable
3278T72Interchangeable
interchangeable cross-reference
interchangeable
5232Interchangeable
interchangeable cross-reference
interchangeable
AB00905232Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70478?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70478?
70478 is a UNIVERSAL JOINT,VEHICULAR manufactured by schleich.
What parts can replace 70478?
There are 12 known substitutes for 70478: PA-2006, 1524-3, 146-030-0006 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70478?
70478 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-108-1173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70478

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026