PartsTable
Technical Data Sheet
Download PDF

7045670 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7045670: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, diameter: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN, material: STEEL COMP 1008 OR STEEL COMP 1022 OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN, special_features: 0.084 TO 0.089 IN. DIA BY 0.31 IN.

DEEP DRILLED IN TOP OF HEAD IN. This part is cataloged in the U.S. Government catalog under NSN 5315-00-015-6624, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7045670
NSN: 5315-00-015-6624
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
diameter0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
materialSTEEL COMP 1008 OR STEEL COMP 1022 OVERALL
head_styleFLAT CHAMFER
chamfer_length0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
special_features0.084 TO 0.089 IN. DIA BY 0.31 IN. DEEP DRILLED IN TOP OF HEAD IN
style_designatorSTRAIGHT
pin_chamfer_angle14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
pin_head_diameter0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
surface_treatmentCADMIUM OR ZINC OVERALL
under_head_length3.280 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN
first_hole_diameter0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
NSN5315-00-015-6624
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7045670 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY1 CL1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY1 CL1 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 3.280 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY1 CL1 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 TY1 CL1 FED SPEC 2ND TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH3.280 INCHES MINIMUM AND 3.300 INCHES MAXIMUM IN
PIN CHAMFER ANGLE14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.074 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-11415 MIL SPEC ALL MATERIAL RESPONSES OVERALL
DIAMETER0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 7045670?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7045670?
7045670 is a PIN,STRAIGHT,HEADED.
What is the NSN for 7045670?
7045670 is cataloged in the U.S. Government catalog under NSN 5315-00-015-6624. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7045670

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.