PartsTable
Technical Data Sheet
Download PDF

70434-5 — CONTACTOR,MAGNETIC

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

70434-5: CONTACTOR,MAGNETIC.

The CONTACTOR,MAGNETIC is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, lubrication: DRY FILM LUBRICANT, temp_rating: 450.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-477-0513, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70434-5
NSN: 5310-00-477-0513
NIINs: 004770513, 015359979
FSC: 5310 — Nuts and Washers
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
lubricationDRY FILM LUBRICANT
temp_rating450.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
overall_height0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
washer_thickness0.019 INCHES MINIMUM IN
width_across_flats0.304 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
NSN5310-00-477-0513
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 70434-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WASHER OUTSIDE DIAMETER: 0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.304 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 450.0 FAHRENHEIT NOMINAL DEGF
•
WASHER THICKNESS: 0.019 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
OVERALL HEIGHT0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.304 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING450.0 FAHRENHEIT NOMINAL DEGF
WASHER THICKNESS0.019 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 7
RMLH3858-048Reference document
Same NSN cross-reference
Reference document — Secondary reference
704343Reference document
Same NSN cross-reference
Reference document — Secondary reference
525-595-9106Reference document
Same NSN cross-reference
Reference document — Secondary reference
BH00205-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
H42-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL2037684Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 70434-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70434-5?
70434-5 is a CONTACTOR,MAGNETIC.
What parts can replace 70434-5?
There are 7 known substitutes for 70434-5: RMLH3858-048, 704343, 525-595-9106 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70434-5?
70434-5 is cataloged in the U.S. Government catalog under NSN 5310-00-477-0513. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70434-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.