PartsTable
Technical Data Sheet
Download PDF

7040488 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7040488: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 1.000 INCHES NOMINAL IN, first_leg_length: 0.562 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-614-8681, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7040488
NSN: 5340-00-614-8681
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width1.000 INCHES NOMINAL IN
first_leg_length0.562 INCHES NOMINAL IN
second_leg_angle90.0 DEGREES NOMINAL
style_designatorADJACENT ANGLES
second_leg_length0.562 INCHES NOMINAL IN
first_leg_thickness0.041 INCHES NOMINAL IN
center_section_width1.000 INCHES NOMINAL IN
second_leg_thickness0.041 INCHES NOMINAL IN
center_section_height0.781 INCHES NOMINAL IN
NSN5340-00-614-8681
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7040488 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.041 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: IDENTICAL
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 0.562 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: NO HOLE
•
CENTER SECTION WIDTH: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ADJACENT ANGLES
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.041 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
SECOND LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG LENGTH0.562 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLENO HOLE
CENTER SECTION WIDTH1.000 INCHES NOMINAL IN
STYLE DESIGNATORADJACENT ANGLES
FIRST LEG STYLESQUARE
SECOND LEG THICKNESS0.041 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
2510006148681Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7040488?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7040488?
7040488 is a BRACKET,DOUBLE ANGLE.
What parts can replace 7040488?
There is 1 known substitute for 7040488: 2510006148681. Substitute compatibility should be verified for your specific system.
What is the NSN for 7040488?
7040488 is cataloged in the U.S. Government catalog under NSN 5340-00-614-8681. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7040488