PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7039-5
7039-5 ✓ Verified by PartsTable
Lindy · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

<b>Converts 6 Pin Male connector to 4 Pin Male connector!</b><br><br>- 4 Pin FireWire Male (Camcorder, etc.) to 6 Pin FireWire Female;<br>- IEEE 1394 compliant. Key specifications include temp_rating: 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: BLACK, inside_diameter: 1.000 INCHES NOMINAL IN, outside_diameter: 1.390 INCHES NOMINAL IN, operating_pressure: 2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, media_for_which_designed: HYDRAULIC FLUID SINGLE RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-141-6972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7039-5
NSN: 5340-00-141-6972
FSC: 5340
CAGE: 72285 — EXACTO INDUSTRIES INC (USA)
SPECIFICATIONS
temp_rating212.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorBLACK
inside_diameter1.000 INCHES NOMINAL IN
outside_diameter1.390 INCHES NOMINAL IN
operating_pressure2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
media_for_which_designedHYDRAULIC FLUID SINGLE RESPONSE
cross-sectional_shape_styleROUND
measuring_method_and_length1.0 FEET NOMINAL WORKING FT
minimum_inside_bending_radius4.500 INCHES IN
part_name_assigned_by_controlling_agencyM2T MEGAFLEX-2 WIRE BRAID HOSE
NSN5340-00-141-6972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7039-5 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL: RUBBER CUSHION
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
LOOP INSIDE DIAMETER: 0.313 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.828 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
MATERIALRUBBER CUSHION
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.828 INCHES NOMINAL IN
DIAMETER0.189 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.578 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
540881Interchangeable
interchangeable cross-reference
interchangeable
70395Interchangeable
interchangeable cross-reference
interchangeable
80048Interchangeable
interchangeable cross-reference
interchangeable
4657-1571Interchangeable
interchangeable cross-reference
interchangeable
TA798-5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7039-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7039-5?
7039-5 is a HOSE,NONMETALLIC manufactured by Lindy.
What parts can replace 7039-5?
There are 5 known substitutes for 7039-5: 540881, 70395, 80048 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7039-5?
7039-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-141-6972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7039-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026