PartsTable
Technical Data Sheet
Download PDF

7035-10-840-4104 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7035-10-840-4104: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_finish: 63.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: RADIUS, pin_overall_length: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-222-9229, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7035-10-840-4104
NSN: 5315-01-222-9229
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish63.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
hardness_rating30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleRADIUS
pin_overall_length1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
pin_overall_diameter0.7503 INCHES MINIMUM AND 0.7507 INCHES MAXIMUM IN
first_end_taper_angle5.0 DEGREES NOMINAL
second_end_corner_radius0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
material_document_and_classificationAMS 6265 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-222-9229
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7035-10-840-4104 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6265 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 5.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.7503 INCHES MINIMUM AND 0.7507 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER
FIRST END STYLECHAMFERED
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6265 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE5.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.7503 INCHES MINIMUM AND 0.7507 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END STYLERADIUS
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315PL2013310Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7035-10-840-4104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7035-10-840-4104?
7035-10-840-4104 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 7035-10-840-4104?
There is 1 known substitute for 7035-10-840-4104: 5315PL2013310. Substitute compatibility should be verified for your specific system.
What is the NSN for 7035-10-840-4104?
7035-10-840-4104 is cataloged in the U.S. Government catalog under NSN 5315-01-222-9229. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7035-10-840-4104

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.