7035-10-822-1101 — GEAR,BEVEL

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

7035-10-822-1101: GEAR,BEVEL.

The GEAR,BEVEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP E9310 OVERALL, bore_style: INVOLUTE SPLINE BOTH ENDS, teeth_type: SPIRAL, pitch_diameter: 12.8350 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 3020-01-089-1014, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7035-10-822-1101

NSN: 3020-01-089-1014
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)

SPECIFICATIONS

material	STEEL COMP E9310 OVERALL
bore_style	INVOLUTE SPLINE BOTH ENDS
teeth_type	SPIRAL
pitch_diameter	12.8350 INCHES NOMINAL IN
pressure_angle	20.0000 DEGREES
hardness_rating	30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
spline_quantity	84 BOTH ENDS
tooth_direction	RIGHT
style_designator	SIDE FACE, PROTRUDING HUBS
face_nominal_width	1.700 INCHES IN
special_test_features	BOSS LOCATED 0.750 IN. FROM EDGE OF SECOND HUB END IN
spline_pitch_diameter	5.2500 INCHES NOMINAL BOTH ENDS IN
NSN	3020-01-089-1014

COMPONENT DIAGRAM

KEY FEATURES

•

TOOTH DIRECTION: RIGHT

•

BORE STYLE: INVOLUTE SPLINE BOTH ENDS

•

SPECIAL TEST FEATURES: BOSS LOCATED 0.750 IN. FROM EDGE OF SECOND HUB END IN

•

TEETH TYPE: SPIRAL

•

HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL

•

NOMINAL OVERALL LENGTH: 9.830 INCHES IN

•

STYLE DESIGNATOR: SIDE FACE, PROTRUDING HUBS

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6265 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

TOOTH DIRECTION	RIGHT
BORE STYLE	INVOLUTE SPLINE BOTH ENDS
SPECIAL TEST FEATURES	BOSS LOCATED 0.750 IN. FROM EDGE OF SECOND HUB END IN
TEETH TYPE	SPIRAL
HARDNESS RATING	30.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL OVERALL LENGTH	9.830 INCHES IN
STYLE DESIGNATOR	SIDE FACE, PROTRUDING HUBS
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6265 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER	12.8350 INCHES NOMINAL IN
SPLINE QUANTITY	84 BOTH ENDS

OTHER ITEMS IN FSC 3020 — Gears, Pulleys, Sprockets, and Transmission Chain

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

3020-00-000-0091 3020-00-001-0027 3020-00-001-0028 3020-00-001-0063 3020-00-001-0064 3020-00-001-0066 3020-00-001-0071 3020-00-001-0072

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)

Ready to buy 7035-10-822-1101?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7035-10-822-1101?

7035-10-822-1101 is a GEAR,BEVEL.

What is the NSN for 7035-10-822-1101?

7035-10-822-1101 is cataloged in the U.S. Government catalog under NSN 3020-01-089-1014. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7035-10-822-1101 — GEAR,BEVEL

Request a Quote — 7035-10-822-1101