PartsTable
Technical Data Sheet
Download PDF

7033M63P033 07482 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7033M63P033 07482: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 2.114 INCHES MINIMUM AND 2.134 INCHES MAXIMUM IN, center_hole_diameter: 2.008 INCHES MINIMUM AND 2.028 INCHES MAXIMUM IN, special_test_features: MATERIAL MUST CONFORM TO MIL-R-83248 TYPE I, CLASS 2 (RUBBER FLUORO CARBON LOW COMPRESSION SET). This part is cataloged in the U.S.

Government catalog under NSN 5330-01-176-8896, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7033M63P033 07482
NSN: 5330-01-176-8896
FSC: 5330 — Packing and Gasket Materials
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
special_featuresTHE RETAINER HAS A .077 INCH MINIMUM AND A .097 INCH MAXIMUM RADIUS ON THE EDGE; IT ALSO HAS A .010 INCH RADIUS ON THE CORNERS IN
peripheral_diameter2.114 INCHES MINIMUM AND 2.134 INCHES MAXIMUM IN
center_hole_diameter2.008 INCHES MINIMUM AND 2.028 INCHES MAXIMUM IN
special_test_featuresMATERIAL MUST CONFORM TO MIL-R-83248 TYPE I, CLASS 2 (RUBBER FLUORO CARBON LOW COMPRESSION SET)
cross-sectional_height0.049 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-01-176-8896
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7033M63P033 07482 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.049 INCHES NOMINAL IN
•
SPECIAL TEST FEATURES: MATERIAL MUST CONFORM TO MIL-R-83248 TYPE I, CLASS 2 (RUBBER FLUORO CARBON LOW COMPRESSION SET)
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 2.114 INCHES MINIMUM AND 2.134 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.008 INCHES MINIMUM AND 2.028 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.049 INCHES NOMINAL IN
SPECIAL TEST FEATURESMATERIAL MUST CONFORM TO MIL-R-83248 TYPE I, CLASS 2 (RUBBER FLUORO CARBON LOW COMPRESSION SET)
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER2.114 INCHES MINIMUM AND 2.134 INCHES MAXIMUM IN
SPECIAL FEATURESTHE RETAINER HAS A .077 INCH MINIMUM AND A .097 INCH MAXIMUM RADIUS ON THE EDGE; IT ALSO HAS A .010 INCH RADIUS ON THE CORNERS IN
CENTER HOLE DIAMETER2.008 INCHES MINIMUM AND 2.028 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7033M63P033 07482?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7033M63P033 07482?
7033M63P033 07482 is a RETAINER,PACKING.
What is the NSN for 7033M63P033 07482?
7033M63P033 07482 is cataloged in the U.S. Government catalog under NSN 5330-01-176-8896. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7033M63P033 07482

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.