PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70328
70328 ✓ Verified by PartsTable
Lindy · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The Lindy DC Jack Extension Cable is perfect when needing that extra length on your power supply. Don't waste money on a new power supply with a longer cable when you can simple use an extension cable, easy and hassle free. This cable uses high quality 24AWG conductors ideal for longer length DC cables.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-181-0109, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70328
NSN: 4720-01-181-0109
FSC: 4720
CAGE: 24161 — GATES CORPORATION (USA)
SPECIFICATIONS
special_featuresNHA IS PA80 CLUTCH ASSEMBLY
end_item_identification3830-01-538-1421, WINCH ATTACHMENT, SINGLE DRUM, MODEL PA80
NSN4720-01-181-0109
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 70328 · Lindy ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
EXTERIOR COLOR: GRAY/GREY
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED STEEL WIRE AND 4TH LAYER BRAIDED STEEL WIRE AND 5TH LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MINIMUM INSIDE BENDING RADIUS: 9.500 INCHES IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
BURST TEST PRESSURE: 16000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEROUND
INSIDE DIAMETER0.750 INCHES NOMINAL IN
EXTERIOR COLORGRAY/GREY
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED STEEL WIRE AND 4TH LAYER BRAIDED STEEL WIRE AND 5TH LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MINIMUM INSIDE BENDING RADIUS9.500 INCHES IN
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
BURST TEST PRESSURE16000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
OPERATING PRESSURE4000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
410594Interchangeable
interchangeable cross-reference
interchangeable
70328Interchangeable
interchangeable cross-reference
interchangeable
KETAC-FILInterchangeable
interchangeable cross-reference
interchangeable
106035Interchangeable
interchangeable cross-reference
interchangeable
12GS4Interchangeable
Same NIIN cross-reference
interchangeable
14268-099-00Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70328?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70328?
70328 is a RESIN,RESTORATIVE,DENTAL manufactured by Lindy.
What parts can replace 70328?
There are 6 known substitutes for 70328: 410594, 70328, KETAC-FIL and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70328?
70328 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-181-0109. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70328

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026