PartsTable
Technical Data Sheet
Download PDF

7030-22-214-2104 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7030-22-214-2104: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER NEOPRENE OVERALL, overall_length: 84.000 INCHES NOMINAL84.000 INCHES NOMINAL IN, cross-sectional_width: 0.835 INCHES MINIMUM AND 0.835 INCHES MINIMUM AND 0.915 INCHES MAXIMUM0.915 INCHES MAXIMUM IN, cross-sectional_height: 0.287 INCHES MINIMUM AND 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM0.337 INCHES MAXIMUM IN, cross-sectional_thickness: 0.018 INCHES MINIMUM AND 0.018 INCHES MINIMUM AND 0.044 INCHES MAXIMUM0.044 INCHES MAXIMUM IN, cross-sectional_shape_style: HOLLOW BULBHOLLOW BULB. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-245-6486, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7030-22-214-2104
NSN: 5330-01-245-6486
FSC: 5330 — Packing and Gasket Materials
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialRUBBER NEOPRENE OVERALL
overall_length84.000 INCHES NOMINAL84.000 INCHES NOMINAL IN
cross-sectional_width0.835 INCHES MINIMUM AND 0.835 INCHES MINIMUM AND 0.915 INCHES MAXIMUM0.915 INCHES MAXIMUM IN
cross-sectional_height0.287 INCHES MINIMUM AND 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM0.337 INCHES MAXIMUM IN
cross-sectional_thickness0.018 INCHES MINIMUM AND 0.018 INCHES MINIMUM AND 0.044 INCHES MAXIMUM0.044 INCHES MAXIMUM IN
cross-sectional_shape_styleHOLLOW BULBHOLLOW BULB
cross_section_inside_diameter0.230 INCHES MINIMUM AND 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-245-6486
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7030-22-214-2104 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.018 INCHES MINIMUM AND 0.018 INCHES MINIMUM AND 0.044 INCHES MAXIMUM0.044 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.287 INCHES MINIMUM AND 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM0.337 INCHES MAXIMUM IN
•
CROSS-SECTIONAL WIDTH: 0.835 INCHES MINIMUM AND 0.835 INCHES MINIMUM AND 0.915 INCHES MAXIMUM0.915 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: HOLLOW BULBHOLLOW BULB
•
CROSS SECTION INSIDE DIAMETER: 0.230 INCHES MINIMUM AND 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
•
MATERIAL: RUBBER NEOPRENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.018 INCHES MINIMUM AND 0.018 INCHES MINIMUM AND 0.044 INCHES MAXIMUM0.044 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.287 INCHES MINIMUM AND 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM0.337 INCHES MAXIMUM IN
CROSS-SECTIONAL WIDTH0.835 INCHES MINIMUM AND 0.835 INCHES MINIMUM AND 0.915 INCHES MAXIMUM0.915 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH84.000 INCHES NOMINAL84.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEHOLLOW BULBHOLLOW BULB
CROSS SECTION INSIDE DIAMETER0.230 INCHES MINIMUM AND 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM IN
MATERIALRUBBER NEOPRENE OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
SS2942-84Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 7030-22-214-2104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7030-22-214-2104?
7030-22-214-2104 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 7030-22-214-2104?
There is 1 known substitute for 7030-22-214-2104: SS2942-84. Substitute compatibility should be verified for your specific system.
What is the NSN for 7030-22-214-2104?
7030-22-214-2104 is cataloged in the U.S. Government catalog under NSN 5330-01-245-6486. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7030-22-214-2104

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.