PartsTable
Technical Data Sheet
Download PDF

7030-783 — OSCILLATOR,CRYSTAL CONTROLLED

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

7030-783: OSCILLATOR,CRYSTAL CONTROLLED.

The OSCILLATOR,CRYSTAL CONTROLLED is a the manufacturer industrial component. Key specifications include design_type: TUBULAR, control_type: REMOTE, overall_width: 1.000 INCHES MAXIMUM IN, inclosure_type: ENCASED, overall_height: 0.840 INCHES NOMINAL IN, overall_length: 2.420 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-230-2341, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7030-783
NSN: 4730-00-230-2341
NIINs: 002302341, 012588763
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
design_typeTUBULAR
control_typeREMOTE
overall_width1.000 INCHES MAXIMUM IN
inclosure_typeENCASED
overall_height0.840 INCHES NOMINAL IN
overall_length2.420 INCHES MAXIMUM IN
connection_typePIN LEFT SIDE
orifice_diameter0.030 INCHES NOMINAL IN
thread_provisionTHREADED LOCATION NOT OTHERWISE SPECIFIED
basic_shape_styleRECTANGULAR OR SQUARE
storage_temp_range-65.0 TO 80.0 CELSIUS DEGC
installation_designMECHANICAL
NSN4730-00-230-2341
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 7030-783 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD PROVISION: THREADED LOCATION NOT OTHERWISE SPECIFIED
•
DESIGN TYPE: TUBULAR
•
ORIFICE DIAMETER: 0.030 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD PROVISIONTHREADED LOCATION NOT OTHERWISE SPECIFIED
DESIGN TYPETUBULAR
ORIFICE DIAMETER0.030 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
703078Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
2405-0-4SSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7030-783?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7030-783?
7030-783 is a OSCILLATOR,CRYSTAL CONTROLLED.
What parts can replace 7030-783?
There are 2 known substitutes for 7030-783: 703078, 2405-0-4S. Substitute compatibility should be verified for your specific system.
What is the NSN for 7030-783?
7030-783 is cataloged in the U.S. Government catalog under NSN 4730-00-230-2341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7030-783

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.