PartsTable
Technical Data Sheet
Download PDF

703-7300409 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

703-7300409: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include length: 9.500 INCHES NOMINAL IN, material: STEEL OVERALL, end_style: CLEVIS AND CLEVIS, body_style: ROUND CLOSED BODY, end_radius: 0.312 INCHES NOMINAL IN, fork_depth: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-494-0628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
703-7300409
NSN: 5340-01-494-0628
NIINs: 014940628, 014943154
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
length9.500 INCHES NOMINAL IN
materialSTEEL OVERALL
end_styleCLEVIS AND CLEVIS
body_styleROUND CLOSED BODY
end_radius0.312 INCHES NOMINAL IN
fork_depth1.000 INCHES NOMINAL IN
fork_width0.312 INCHES NOMINAL IN
shank_length1.969 INCHES NOMINAL IN
hole_diameter0.375 INCHES NOMINAL IN
overall_width0.9844 INCHES NOMINAL IN
shank_diameter0.750 INCHES NOMINAL IN
fork_span_width0.312 INCHES NOMINAL IN
NSN5340-01-494-0628
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 703-7300409 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.750 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.312 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.312 INCHES NOMINAL IN
•
END RADIUS: 0.312 INCHES NOMINAL IN
•
SHANK LENGTH: 1.969 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.312 INCHES NOMINAL IN
FORK ARM THICKNESS0.312 INCHES NOMINAL IN
END RADIUS0.312 INCHES NOMINAL IN
SHANK LENGTH1.969 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.9844 INCHES NOMINAL IN
END ITEM IDENTIFICATIONUSED ON MONORAIL ASSY
MATERIALSTEEL OVERALL
FORK DEPTH1.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
703-7300409 ITEM NO 14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
115-NReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 703-7300409?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 703-7300409?
703-7300409 is a CLEVIS,ROD END.
What parts can replace 703-7300409?
There are 2 known substitutes for 703-7300409: 703-7300409 ITEM NO 14, 115-N. Substitute compatibility should be verified for your specific system.
What is the NSN for 703-7300409?
703-7300409 is cataloged in the U.S. Government catalog under NSN 5340-01-494-0628. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 703-7300409

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.