PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 703-2298066 PIE
703-2298066 PIE ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The DIAL AND SHAFT ASSEMBLY is a the manufacturer industrial component. Key specifications include shaft_type: SHOULDERED, gear_location_on_shaft: ON END OF SHAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5384, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
703-2298066 PIE
NSN: 3110-00-554-5384
FSC: 3110
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shaft_typeSHOULDERED
gear_location_on_shaftON END OF SHAFT
NSN3110-00-554-5384
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 703-2298066 PIE · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
OVERALL WIDTH10.0 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
101524Interchangeable
interchangeable cross-reference
interchangeable
12665Interchangeable
interchangeable cross-reference
interchangeable
98206Interchangeable
interchangeable cross-reference
interchangeable
CR-25B/[email protected]Interchangeable
interchangeable cross-reference
interchangeable
106KInterchangeable
interchangeable cross-reference
interchangeable
A-A-1289Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 703-2298066 PIE?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 703-2298066 PIE?
703-2298066 PIE is a DIAL AND SHAFT ASSEMBLY.
What parts can replace 703-2298066 PIE?
There are 21 known substitutes for 703-2298066 PIE: 101524, 12665, 98206 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 703-2298066 PIE?
703-2298066 PIE is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5384. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 703-2298066 PIE

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026